The Yacht Maintenance Hub, The resource for Yacht Maintenance & Repairs310310
26 September 2025 | Read it in 9 minutes
Written by Archie Wilson
Archie Wilson is a commercially endorsed Yachtmaster Offshore, experienced Bosun, yacht crew member and founder of The Yacht Maintenance Hub. His background spans superyachts, private motor yachts, chase boats and sailing yachts, with hands-on experience in maintenance, refit work, boat building, deck operations and basic engineering. Having also lived aboard sailing yachts and helped smaller boat owners manage their own maintenance, Archie created TYMH to share practical guidance grounded in real onboard experience.
Jet ski winterization helps protect your personal watercraft (PWC) from trapped water, deteriorating fuel, corrosion and battery problems during storage.
However, Sea-Doo, Yamaha WaveRunner and Kawasaki Jet Ski models do not all use the same maintenance procedures. This guide explains what to check, what to prepare and where your model’s instructions matter.
Some links on this page are affiliate links. This means The Yacht Maintenance Hub may earn a commission if you click through and make a purchase, at no extra cost to you. We only recommend products, tools and marine suppliers that we believe are useful for yacht owners, captains, crew and marine professionals.
Quick Answer: How Do You Winterize a Jet Ski?
Prepare fresh fuel with the correct stabiliser, complete scheduled servicing, flush and drain the systems specified in your manual, protect the engine internally as directed, and maintain the battery. Finish by cleaning, drying and covering the PWC. Follow the exact model’s instructions for flushing times, freeze protection and storage lubrication.
When Should You Winterize a Jet Ski?
Prepare your PWC after its final planned use and before freezing weather. Extended storage also needs preparation in warm climates because fuel, batteries and exposed components can deteriorate without frost.
The operator’s manual for the exact model and year.
A hose and the correct PWC flushing connector.
Fuel stabiliser suitable for the permitted fuel.
Specified engine oil, filter and extraction equipment, where required.
Approved storage lubricant and corrosion protection.
A charger suitable for the battery’s chemistry and capacity.
Mild cleaner, soft cloths and a fitted, breathable cover.
A generic winterization kit may contain unsuitable parts or unnecessary chemicals. Check compatibility before buying.
How to Winterize a Jet Ski: 9 Practical Steps
Use these steps as a planning checklist; follow your manual’s order where it differs. Run the engine outdoors, with the craft securely supported and people clear of the jet pump.
1. Inspect the PWC Before Storage
Remove the key or safety lanyard before inspecting the intake, impeller and steering components. Look for debris, damage, leaks and loose fittings. Avoid reaching into the pump; lodged debris may need professional removal.
Record engine hours and outstanding faults. Fuel smells, damaged hoses, overheating warnings or signs of water contamination need attention before storage.
2. Stabilise Fresh Fuel
Add the correct dose of stabiliser to fresh fuel. Follow the PWC manual’s storage fill level, leaving the specified expansion space. Do not fill into the filler neck.
Plan treatment before the final permitted engine run so treated fuel reaches the fuel system. Follow the manual’s cooling and running limits rather than idling on the trailer for an arbitrary period.
STA-BIL’s product guidance confirms that stabiliser does not restore old petrol. Contaminated fuel needs assessment, not extra additive.
3. Complete Due Oil and Filter Servicing
For four-stroke engines, complete the oil and filter work required by the service schedule and storage instructions. Use the specified oil grade, approval and filter; “marine oil” alone is not a sufficient specification.
Follow the model’s extraction and oil-level procedure. Do not assume the published total capacity is the correct refill amount after a routine oil change.
Two-stroke engines need their own lubrication and storage procedure.
4. Flush Using the Correct Procedure
Use the designated flush port and matching connector. Outboard flushing earmuffs are not a general-purpose PWC solution.
Many PWCs require this sequence: start the engine, immediately turn on the water, then turn off the water before stopping the engine. Confirm the sequence, flow, duration and shutdown procedure in your manual.
For example, Yamaha’s 2013 VXR/VXS manual warns that supplying flushing water while the engine is stopped can cause water to enter the engine. If it stalls during flushing, turn the water off immediately.
A connected hose does not make unlimited running ashore safe.
5. Complete the Model’s Freeze-Protection Procedure
Flushing removes contamination; it does not necessarily remove every pocket of water.
On Sea-Doo models with closed-loop engine cooling, engine coolant and the raw-water exhaust circuit are separate. Coolant in the engine does not protect water trapped in the exhaust. Check the manual for any additional components that need draining.
Sea-Doo’s winterization guidance includes an exhaust draining procedure using compressed air. Confirm your model’s method, connection and pressure limit before attempting it.
Do not assume tilting the trailer is sufficient or add antifreeze through an improvised arrangement. Ask a PWC technician if the required procedure is unclear.
6. Protect the Engine and Lubrication Points
Follow the specified internal storage-lubrication procedure, sometimes called fogging. The product, application point and method vary by engine.
For example, Sea-Doo’s storage guidance describes cylinder lubrication through the spark-plug openings. Spraying oil into a running engine’s intake is therefore unsuitable as a universal instruction.
Use the correct cranking precautions and spark-plug torque if doing this work yourself. Lubricate only the points listed in the manual, and keep protective sprays off grips, seats and footpads.
7. Prepare the Battery for Storage
Follow the manual’s isolation or removal procedure. Where removal is specified, disconnect negative first, then positive; reconnect in reverse order.
Clean and inspect the battery, protect its terminals and store it securely in a dry, ventilated location. Charge lead-acid or AGM batteries before storage and check them periodically.
Choose the correct charger mode and charging current. A lithium replacement battery needs its manufacturer’s storage and temperature instructions.
Wash away salt and dirt with a surface-compatible cleaner. Dry storage lockers, seat undersides and the engine compartment before covering. Avoid directing high-pressure water at electrical equipment or seals.
Check the hull material before using wax or polish; not every PWC has a conventional gelcoat finish.
Use a secure stand or trailer and a breathable, well-fitting cover. Follow the manual’s storage position and drain-plug instructions. Record any plugs removed so they are refitted before launch.
9. Record the Work and Schedule Checks
Log completed servicing, fuel treatment, battery location and anything disconnected or removed. Tag the controls to prevent an accidental start before recommissioning.
Set an inspection schedule suited to the storage location. Check for water pooling, dampness, pests and loose covers, particularly after storms. Follow the battery manufacturer’s check interval.
Copying another model’s procedure: Similar-looking PWCs can have different flushing and lubrication requirements.
Running too long ashore: A hose does not remove all cooling or driveline restrictions.
Confusing flushing with freeze protection: Water may remain after a freshwater flush.
Using stabiliser to fix stale fuel: Additives do not make deteriorated petrol fresh again.
Greasing every cable or bearing: Some components have specific products, service methods or no routine greasing requirement.
Covering a damp craft: Trapped moisture encourages mould and corrosion.
Restarting after storage preparation: Further use can reintroduce water and require parts of the process to be repeated.
Practical Guidance for Owners and Crew
For Owners
Keep a dedicated storage checklist beside the operator’s manual. Photograph the battery connections and any removed parts before disassembly.
If paying for winterization, ask whether the quote includes oil servicing, internal lubrication, freeze protection and battery care. Storage fees may be separate.
For Yacht Crew
Create a separate record for each PWC, including model, year, engine hours, fuel treatment and completed work. Assign a crew member to outstanding jobs and include them in the handover.
Agree the work scope with engineering before moving the craft into storage. A clean exterior should not be treated as evidence that mechanical winterization is complete.
Frequently Asked Questions About Jet Ski Winterization
Do You Need to Winterize a Jet Ski in a Heated Garage?
Yes, storage preparation still matters. Reliable heating reduces freezing exposure, but it does not prevent fuel deterioration, battery discharge or corrosion. Consider whether a power failure could expose the craft to frost.
Do All Jet Skis Need Antifreeze?
No. Requirements depend on the model and circuit. Some Sea-Doo engines already contain coolant, while separate raw-water passages still need attention. Use only the freeze-protection method and products specified for your PWC.
Should You Store a Jet Ski with a Full Fuel Tank?
Follow the manufacturer’s storage fill level. Many recommend fresh, treated fuel in a topped-up tank. Leave the required expansion space, avoid overfilling and check for leaks.
Can You Start a Jet Ski Occasionally During Winter?
Do not use occasional starts as a substitute for winterization. Running may disturb the storage preparation. If you recommission and use the craft, repeat the required lay-up steps before storing it again.
Can You Winterize a Jet Ski Yourself?
Owners can often handle cleaning, inspection and suitable battery care. Engine preservation and freeze protection require the correct equipment and procedure. Use a PWC technician where the manual specifies dealer work or you lack the necessary experience.
What Should You Check Before the First Spring Ride?
Complete the manual’s return-to-service checks. Refit drain plugs and removed components, verify the battery installation, inspect for leaks, and check controls, safety lanyard, fluid levels and the jet intake before launching.
Start with your model’s storage instructions, complete the mechanical work and document what remains before launch. A clear record helps both owners and crew avoid missed steps when the PWC returns to service.
Join the newsletter for practical yacht maintenance advice, new guide releases, downloadable resources, product recommendations and seasonal reminders designed to help owners, captains and crew make better maintenance decisions onboard. As TYMH grows, subscribers will also get early access to new checklists, maintenance resources, recommended products and exclusive offers or discounts from selected marine brands.
Success
Thank you for signing up to receive updates from The Yacht Maintenance Hub.
Blog / Jet Ski Winterization: 9 Steps for Safe Winter Storage
We track how people interact with our online web content and resources, and some of that tracking involves storing cookies on your device. By continuing to use our site you accept that you agree to this. For more details see our Privacy Statement.